祥舜-简体中文 PCB 内层蚀刻冲孔机 ( Post-Etch Punch system ):祥舜 is a leader in Equipment Manufacturing and Precision Contract Machining. (Post Etch Punch)

PE3000>>内层蚀刻对位冲孔机(PE冲孔机)

PE3000 (Post-Etch Punch system)
产品类别: 印刷电路板设备
制程细目: 内层冲孔机
产品分类: 内层( Inner layer )
产品名称: PCB内层蚀刻自动对位冲孔机
英文名称: PE3000 Automatic Post-Etch Punching System

Advantages for Multilayer Manufacturing

Post-etch punching avoids the tolerance errors that accumulate when punching is done prior to etching. As a result, multiple layers are registered with greater precision and the finished PCBs reflect maximum accuracy. In other words, the post-etch process dramatically improves multilayer productivity and yields.

A post-etch punch enables us to view the etched target placed on the board in relation to the image and subsequently split the difference of any error and punch the tooling hole locations.

Image registration is now greatly improved because the punch locations are placed in relation to the image.

Expansion and contraction error can now be compensated for prior to lamination. This is possible because the majority of material expansion and contraction has already occurred during the previous develop-etch-strip phase.

≡   主要优点   ≡
  • 优点 01:全能PC Base 具大量资料处理功能.
  • 优点 02:智慧型视觉影像处理,(2CCD or 4CCD)及双Monitor
  • 优点 03:具Offset补偿选择功能,记录各内层之偏移量.
  • 优点 04:可设定误差值,剔除板材涨缩过大之不良品.
  • 优点 05:具预视功能,一边冲孔一边置板预看,可提升工作效能
  • 优点 06:预视台面有雷射光点辅助,方便操作者置板及对位.
  • 优点 07:有上、下光源可供选择,可应用于不同透视度之板材
  • 优点 08:靶标之装作不拘限于阴片或阳片,CCD均可正确判读
  • 优点 09:中文化触控萤幕,操控简便.
  • 优点 10:具吹气功能,防止板子磨擦、刮伤.
  • 优点 11:油压单元独立,方便装程场地之规画.
  • 优点 12:油压冲孔,高压可逹16吨以上之出力;正常出力约为6.5吨.
≡  机器规格  ≡
工作尺寸 最大30"x25", 最小13"x12".
板材厚度 2~40mil (Max.60).
靶标位于 水平中心线后1.5"处. (详细制作尺寸如附表)
冲孔重现位置精度 ±0.001".
冲孔重现视觉精度 ±0.0005".
使用气压 5~6Kg/c㎡.
使用电压 220V三相30A.(电压可依使用地区指定)
耗气量 50L/Min.
耗电量 6KW.
机械尺寸 1550mmW,1700mmL,1350mmH.
油压单元尺寸 1250mmW,820mmL,1150mmH.
机械重量 1900Kgs.
油压单元 600Kgs.